Faq's

To maximize the efficiency of the Flory Powr' Track Shredder and minimize your shredding cost:

Stack prunings sideways (across the row).
Keep the width of the brush less than 9' wide (the head of the machine is 10’ wide).
If prunings are longer than 10’, stack them at an angle (30 to 45 degrees).
If prunings exceed 12’ in length, we recommend an additional cut be made rather than stacking at an angle.
Stack whips or prunings without laterals on top of larger brush.
Avoid stacking brush longways (down the row).
In heavy prunings (continuous brush more than 3' high), stack brush every row.
With light prunings, consolidate material into piles.
Place the first pile of brush at least 3 trees into the field.
Keep prunings less than 3" in diameter, this will increase the efficiency of the machine, reducing your shredding cost.
Stack prunings in the middle of the row, and in a straight line.

Things to Avoid

Incorrect stacking, brush is too tall.	Incorrect stacking, brush is too wide.
Incorrect stacking, brush is stacked sown the row (parallel to berm).	Results of incorrect stacking. The brush was stacked too high, yielding larger chip size.
Results of incorrect stacking. The brush was stacked too wide resulting in piles left on the side.